Difference between revisions of "X-Carve"

From Lowell Makes
Jump to navigationJump to search
(5 intermediate revisions by the same user not shown)
Line 3: Line 3:
   
 
== What is it? ==
 
== What is it? ==
It's a computer-controlled router that can be used to cut or carve designs on wood and other similar materials, based on a design drawn on the computer. It's controlled by a computer next to it, usually running Easel, a cloud-based, browser-based program that lets you draw your design and send it to the X-Carve. It was donated by Dan Dugmore, Lowell Makes 3D printer captain. It's located in the machine shop.
+
It's a computer-controlled router that can be used to cut or carve designs on wood and other similar materials, based on a design drawn on the computer. It's controlled by a computer next to it, usually running Easel, a cloud-based, browser-based program that lets you draw your design and send it to the X-Carve. It was donated by Dan Dugmore, Lowell Makes 3D printer captain. It's located in the Rapid Prototyping shop.
   
 
This is an easy way to learn CNC. Easy, because it's hard to do any expensive damage i.e., crashing the tool against its stops will not damage anything. About the worst that can happen is a broken bit or marring the spoil board.
 
This is an easy way to learn CNC. Easy, because it's hard to do any expensive damage i.e., crashing the tool against its stops will not damage anything. About the worst that can happen is a broken bit or marring the spoil board.
Line 13: Line 13:
 
It can route PCBs.
 
It can route PCBs.
   
== How can I use it? ==
+
== How do I get started? ==
 
Create a free account at http://easel.inventables.com/users/sign_in
 
Create a free account at http://easel.inventables.com/users/sign_in
   
 
Watch tutorials here: https://inventables.desk.com/customer/en/portal/topics/1022638-easel-tutorials/articles
 
Watch tutorials here: https://inventables.desk.com/customer/en/portal/topics/1022638-easel-tutorials/articles
   
Contact Jim Fred to get checked-out.
+
Contact Jim Fred to get checked-out. It'll take about 30 to 45 minutes. Have a simple Easel project (e.g., your name) ready to carve into a piece of scrap wood.
 
Contact Ben Towle, the Machine Shop captain, to get FOB access to the shop.
 
   
 
== FAQ ==
 
== FAQ ==
Line 26: Line 24:
 
Ask Jim Fred or Dan Dugmore for a check-out.
 
Ask Jim Fred or Dan Dugmore for a check-out.
 
=== Where do I get bits? ===
 
=== Where do I get bits? ===
So far, users have been using their own bits, frequently purchased from https://www.toolstoday.com/cnc-router-bits-and-insert-bits.html. Sometimes, there are bits laying around the machine. Jim has a box of these bits https://docs.google.com/spreadsheets/d/1CMjTUdnuliNYiwdyVal-XB-fDxm1-ZVBIgDBWF3dQf4/edit?usp=sharing that he keeps in his desk drawer.
+
So far, users have been using their own bits, frequently purchased from https://www.toolstoday.com/cnc-router-bits-and-insert-bits.html. Sometimes, there are bits laying around the machine. Jim has a box of these bits https://docs.google.com/spreadsheets/d/1CMjTUdnuliNYiwdyVal-XB-fDxm1-ZVBIgDBWF3dQf4/edit?usp=sharing that he keeps in a plastic toolbox in the rapid prototyping shop.
  +
 
=== What if I have more questions? ===
 
=== What if I have more questions? ===
 
Ask people around the shop
 
Ask people around the shop
Line 33: Line 32:
   
 
Check the Easel forum https://discuss.inventables.com/c/easel
 
Check the Easel forum https://discuss.inventables.com/c/easel
=== Who else uses it? ===
 
Jim Fred seems to use it the most. Others: E.B., Dan Dugmore, Jack Walsh.
 
 
=== What are the working dimensions? ===
 
=== What are the working dimensions? ===
 
maximum cutting area of 500mm x 500mm x 65mm (about 2 inches deep, which would require a long bit)
 
maximum cutting area of 500mm x 500mm x 65mm (about 2 inches deep, which would require a long bit)

Revision as of 10:46, 8 August 2019

X-Carve CNC Router

Xcarve.jpg

What is it?

It's a computer-controlled router that can be used to cut or carve designs on wood and other similar materials, based on a design drawn on the computer. It's controlled by a computer next to it, usually running Easel, a cloud-based, browser-based program that lets you draw your design and send it to the X-Carve. It was donated by Dan Dugmore, Lowell Makes 3D printer captain. It's located in the Rapid Prototyping shop.

This is an easy way to learn CNC. Easy, because it's hard to do any expensive damage i.e., crashing the tool against its stops will not damage anything. About the worst that can happen is a broken bit or marring the spoil board.

What can it do?

See some example projects here: https://www.inventables.com/projects It can V-Carve crisp letters for signage. It can do full 3D profiles but this would require 3D CAD tools in addition to Easel. It can route PCBs.

How do I get started?

Create a free account at http://easel.inventables.com/users/sign_in

Watch tutorials here: https://inventables.desk.com/customer/en/portal/topics/1022638-easel-tutorials/articles

Contact Jim Fred to get checked-out. It'll take about 30 to 45 minutes. Have a simple Easel project (e.g., your name) ready to carve into a piece of scrap wood.

FAQ

What approval is required for me to use it?

Ask Jim Fred or Dan Dugmore for a check-out.

Where do I get bits?

So far, users have been using their own bits, frequently purchased from https://www.toolstoday.com/cnc-router-bits-and-insert-bits.html. Sometimes, there are bits laying around the machine. Jim has a box of these bits https://docs.google.com/spreadsheets/d/1CMjTUdnuliNYiwdyVal-XB-fDxm1-ZVBIgDBWF3dQf4/edit?usp=sharing that he keeps in a plastic toolbox in the rapid prototyping shop.

What if I have more questions?

Ask people around the shop

Contact people on BaseCamp, either pinging them directly or using the campfire

Check the Easel forum https://discuss.inventables.com/c/easel

What are the working dimensions?

maximum cutting area of 500mm x 500mm x 65mm (about 2 inches deep, which would require a long bit)

How do you secure work stock (wood) before cutting?

Use the clamp set in the kit kept near the router. If you are cutting through your wood, please put a thin piece of scrap between your wood and the cutting bed.

Use double sided tape.