Virtual Pinball

From Lowell Makes
Revision as of 10:50, 22 August 2014 by Wolff000 (talk | contribs) (→‎Materials)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

Virtual Pinball machine

The goal for this project is to fabricate a digital/virtual pinball machine. This could be the beginning of a Lowell Makes Arcade. This could definitely be a selling point with new members.

Preliminary Design

  • The pinball machine ideally will be around the size of a standard mechanical pinball machine.
  • There is an instructable for a digital pinball machine on Instructables.com that goes step by step in construction.

http://www.instructables.com/id/Digital-Pinball-Machine/


Materials

We will need wood or mdf for the cabinet.
If we want it to be close to a full size playing field the instructable suggests a 37" flat screen. It can be built using a smaller screen. We could also use a short throw projector built into the base.
Monitor for the back glass/scoring section.
Arcade Buttons
Keyboard Encoder
Small PC to run the software. An old laptop or junk pc should do fine. The software does not require a lot of power. Graphics are something to keep in mind though.

Task List

  • Source materials and initial design.