Difference between revisions of "Sable-2015"
From Lowell Makes
Jump to navigationJump to search (Created page with "'''3 Axis CNC Engraving Mill'''[http://www.cnc-sable.nl/sable-2015-tafelfrees-p-21.html?language=en] Mill is operational using the LinuxCNC install on connected computer. Mill …") |
Jabberwocky (talk | contribs) |
||
(4 intermediate revisions by one other user not shown) | |||
Line 2: | Line 2: | ||
Mill is operational using the LinuxCNC install on connected computer. |
Mill is operational using the LinuxCNC install on connected computer. |
||
+ | |||
Mill currently does not have limit or homing switches. |
Mill currently does not have limit or homing switches. |
||
+ | =Use Steps= |
||
+ | |||
+ | '''THE MILL SHOULD ALWAYS BE USED WHILE WEARING EYE PROTECTION. THE MILL SHOULD NEVER BE USED UNATTENDED WHILE ENERGIZED!''' |
||
+ | |||
+ | 1> Boot PC if not booted, log in under 'maker', and double click the 'launch Sable'icon |
||
+ | |||
+ | 2> Ensure work piece is affixed to the bed securely |
||
+ | |||
+ | 3> Install cutting bit securely. |
||
+ | |||
+ | 4> Turn on power strip between Mill and monitor, energizing the spindle and controller. |
||
+ | |||
+ | 5> Follow homing and tool length offset processes. |
||
=Upgrade Options= |
=Upgrade Options= |
||
Floating Spindle |
Floating Spindle |
||
+ | |||
MDF bed w/ vaccum |
MDF bed w/ vaccum |
||
+ | |||
Hall Effect homing switches |
Hall Effect homing switches |
||
+ | |||
Mechanical limit switches |
Mechanical limit switches |
||
+ | |||
automatic tool length tester |
automatic tool length tester |
||
Line 16: | Line 34: | ||
lubrication |
lubrication |
||
+ | |||
bed leveling |
bed leveling |
||
+ | |||
+ | [[Category:Tools]] |
||
+ | [[Category:Rapid Prototyping]] |
||
+ | [[Category:Machine Shop]] |
Latest revision as of 15:34, 21 December 2017
3 Axis CNC Engraving Mill[1]
Mill is operational using the LinuxCNC install on connected computer.
Mill currently does not have limit or homing switches.
Use Steps
THE MILL SHOULD ALWAYS BE USED WHILE WEARING EYE PROTECTION. THE MILL SHOULD NEVER BE USED UNATTENDED WHILE ENERGIZED!
1> Boot PC if not booted, log in under 'maker', and double click the 'launch Sable'icon
2> Ensure work piece is affixed to the bed securely
3> Install cutting bit securely.
4> Turn on power strip between Mill and monitor, energizing the spindle and controller.
5> Follow homing and tool length offset processes.
Upgrade Options
Floating Spindle
MDF bed w/ vaccum
Hall Effect homing switches
Mechanical limit switches
automatic tool length tester
Maintenance Schedule
lubrication
bed leveling