Difference between revisions of "Machine Shop"
From Lowell Makes
Jump to navigationJump to searchJabberwocky (talk | contribs) m (Jabberwocky moved page Metal Shop to Machine Shop: More accurate name) |
Jabberwocky (talk | contribs) (Adding Shop Rules) |
||
Line 1: | Line 1: | ||
{{Shop_Info |
{{Shop_Info |
||
− | |shop= |
+ | |shop=Machine Shop |
|captain=Ben Towle |
|captain=Ben Towle |
||
|email=machine |
|email=machine |
||
Line 8: | Line 8: | ||
}} |
}} |
||
+ | == Basic Shop Rules == |
||
+ | # To Use Any Equipment You Must Be Checked Out |
||
+ | #* Only members who have been checked out may use general equipment |
||
+ | #* Guests can be let in, but are not allowed to touch equipment |
||
+ | #* Additional checkout is required for the following equipment: |
||
+ | #** Grizzly Lathe |
||
+ | #** Knee Mill |
||
+ | #** Tormach CNC |
||
+ | #** Surface Grinder |
||
+ | #** Welder |
||
+ | # Ask For Instruction If Unsure Of How To Use Equipment |
||
+ | #* Operating machinery that you are not familiar with can cause personal injury or broken equipment |
||
+ | # If You Break Something, Say Something |
||
+ | #* Report any broken equipment to the shop captain or cocaptain |
||
+ | #* Don’t try to fix it yourself, it can make problems worse |
||
+ | # Chip In For Consumable Tooling |
||
+ | #* If you use anything that wears out over time (blades, sanding belts, welding gas, cutting tools, etc.) chip in for replacements, or better yet, donate replacement tooling |
||
+ | # Clean Up After Yourself |
||
+ | #* After you are done working, the area should look as it did when you arrived. Picture posted at each station that illustrates how the area looks |
||
+ | #* No project should be left out unsupervised for more than 2 hours |
||
+ | # No Unapproved Chemicals |
||
+ | #* Absolutely no flammables, acids, corrosives |
||
+ | #* Do not put chemicals into unlabeled containers |
||
+ | #* When in doubt, ask the captain or co-captain |
||
+ | # No Open Flame |
||
+ | # Use Caution When Cutting Nonmetals |
||
+ | #* Bearing and way surfaces should be protected or masked |
||
+ | #* Materials should be cut dry |
||
== Equipment List == |
== Equipment List == |
||
Revision as of 13:03, 13 June 2018
Machine Shop Summary | |
---|---|
Shop Captain | Ben Towle |
Contact email | [email protected] |
Location | Downstairs |
Check Out Required? | Yes |
Basecamp | link |
Basic Shop Rules
- To Use Any Equipment You Must Be Checked Out
- Only members who have been checked out may use general equipment
- Guests can be let in, but are not allowed to touch equipment
- Additional checkout is required for the following equipment:
- Grizzly Lathe
- Knee Mill
- Tormach CNC
- Surface Grinder
- Welder
- Ask For Instruction If Unsure Of How To Use Equipment
- Operating machinery that you are not familiar with can cause personal injury or broken equipment
- If You Break Something, Say Something
- Report any broken equipment to the shop captain or cocaptain
- Don’t try to fix it yourself, it can make problems worse
- Chip In For Consumable Tooling
- If you use anything that wears out over time (blades, sanding belts, welding gas, cutting tools, etc.) chip in for replacements, or better yet, donate replacement tooling
- Clean Up After Yourself
- After you are done working, the area should look as it did when you arrived. Picture posted at each station that illustrates how the area looks
- No project should be left out unsupervised for more than 2 hours
- No Unapproved Chemicals
- Absolutely no flammables, acids, corrosives
- Do not put chemicals into unlabeled containers
- When in doubt, ask the captain or co-captain
- No Open Flame
- Use Caution When Cutting Nonmetals
- Bearing and way surfaces should be protected or masked
- Materials should be cut dry
Equipment List
List of Shops | |
---|---|
Upstairs | • 3D Printing • Coffee Shop • Electronics Shop • Photography Studio • Fermentation |
Downstairs | • Bike Shop • Ceramics Studio • Cosplay Shop • Craft and Fabrics • Machine Shop • Spray Booth • Woodshop • Rapid Prototyping Shop |