Difference between revisions of "MAME Cabinet"

From Lowell Makes
Jump to navigationJump to search
Line 9: Line 9:
   
   
== Materials ==
+
== Parts and Materials ==
   
 
We will need wood or mdf for the cabinet.
 
We will need wood or mdf for the cabinet.
Line 16: Line 16:
 
<br>Keyboard Encoder
 
<br>Keyboard Encoder
 
<br>Small PC to run the software. An old laptop or junk pc should do fine. The software does not require a lot of power. Graphics are something to keep in mind though.
 
<br>Small PC to run the software. An old laptop or junk pc should do fine. The software does not require a lot of power. Graphics are something to keep in mind though.
  +
<br>Panels, perhaps adorned with Lowell Makes insignia
   
 
=== The Screen ===
 
=== The Screen ===
Line 25: Line 26:
 
* Weight: 80.5 lbs
 
* Weight: 80.5 lbs
 
* Power Consumption: 125 W
 
* Power Consumption: 125 W
  +
  +
=== Keyboard Encoder ===
  +
  +
I (Keith) went ahead and ordered an [http://www.ultimarc.com/ipac1.html I-PAC2 from Ultimarc]. Based on my reading this seems to be the go-to encoder for DIY cabinet builders. It has room for 32 inputs, which should cover our needs. The board itself has PS/2 outputs but comes with a PS/2-to-USB cable. We should be able to simply wire our controls to these inputs and get USB keyboard commands out of it.
  +
  +
The silkscreen on the thing indicates the default controls (8 buttons, 4 directions, coin and start per 4 players) but it looks like there's also a means to rebind them as necessary. It's also all just keyboard commands so we should be able to configure the games to accept whatever we throw at it.
   
 
== Task List ==
 
== Task List ==

Revision as of 11:38, 31 October 2014

MAME Machine

The goal for this project is to fabricate an arcade cabinet for a MAME machine. This could be the beginning of a Lowell Makes Arcade. This could definitely be a selling point with new members.

Preliminary Design

  • The aracde machine size would be dictated by the size screen we put into it.
  • There are many tutorials online that go into building cabinets in great detail.


Parts and Materials

We will need wood or mdf for the cabinet.
Play Screen
Arcade Buttons
Keyboard Encoder
Small PC to run the software. An old laptop or junk pc should do fine. The software does not require a lot of power. Graphics are something to keep in mind though.
Panels, perhaps adorned with Lowell Makes insignia

The Screen

Electronic Horizons donated an old TV. It's a Toshiba 27A23 CRT. I managed to find a manual online that included the following specs.

  • 27 inch Screen
  • Dimensions: 25 9/16in x 22 1/2in x 19 11/16in
  • Weight: 80.5 lbs
  • Power Consumption: 125 W

Keyboard Encoder

I (Keith) went ahead and ordered an I-PAC2 from Ultimarc. Based on my reading this seems to be the go-to encoder for DIY cabinet builders. It has room for 32 inputs, which should cover our needs. The board itself has PS/2 outputs but comes with a PS/2-to-USB cable. We should be able to simply wire our controls to these inputs and get USB keyboard commands out of it.

The silkscreen on the thing indicates the default controls (8 buttons, 4 directions, coin and start per 4 players) but it looks like there's also a means to rebind them as necessary. It's also all just keyboard commands so we should be able to configure the games to accept whatever we throw at it.

Task List

  • Source materials and initial design.

Resources